İST İşçi Sağlığı Teçhizatı San. Tic. Ltd. Şti.
Ostim Mah. İvedik OSB 31.Cad 2269.Sok No:42 Yenimahalle 06374, Ankara, Turkey
Ankara
Turkiye
+90 312 384 13 00
+90 312 341 73 03
FYRPRO FYRAL FYRTEX FYRHOOD HEATPRO ISTEC ISTAIR SAFECAN ISTEX IST ELECTPRO STEAMPRO
Since 1979, we produce equipments for; OCCUPATIONAL HEALTH AND SAFETY FIRST AID & CIVIL DEFENSE FIRE & CBRN & PERSONAL PROTECTION. Our headquarters and factory are located in Ankara. With our network of distributors spread all over the country and worldwide we distribute our best and high quality service to customers in the shortest time. Our company has TS EN ISO 9001 Quality Certificate. All our products are certified according to international standards. With the high quality products we manufacture, our export sales increase day by day. What We Do at our Emergency Shower Division We provide variety of special services you may need. Engineering Consultation IST provides complete information on the design, use, supply and care of emergency showers and eye/face wash fountains, safety storage and plunger cans, spill containment systems, decontamination systems and airline breathing systems. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution. Quality and Safe Product Selection Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems. Special Engineering Solutions Each shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST is fully equipped to offer and produce the special designed systems according to your needs. Adjusting Water Temperature Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face wash fountains will work properly under all circumstances. Our experts will work in coordination with your design or expert team. Pre-Sales Solid Modelling and Technical Drawing We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three dimensional detailed technical drawings are available for all our products. After-Sales Support Our expert technicians can evaluate your existing emergency shower and eye/face wash fountain systems to ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower. All our products are guaranteed against production and workmanship defects for a period of 24 months. What We Do at our Protective Clothings Division We provide variety of special services you may need. Consultation IST provides complete information on the design, use, supply and care of industrial heat and flame protective workwear / underwear / balaclavas, electric arc protective clothings, fireman suits, aluminized fire proximity/entry suits, air cooled kiln entry clothings, functional and thermal underwears/t-shirts. Our experienced team will provide you the best economical solution with customized size dimensions, preliminary study and technical drawings. Quality and Safe Product Selection Our product range has a wide range of standard and optional designs. We provide special protective clothing solutions suitable for work areas, that do not compromise protection while providing ease of movement. Special Engineering Solutions Each garment is designed for different purposes and has different certificates. A protective garment cannot substitute another. The most suitable and most appropriate solution must be determined according to the protection level and area of use. In IST® textile production workshop, fabrics are cut by using licensed cloth spreading software to combine the best designs with the best stitching properties with same pattern in all sizes and to prevent the possibility of encountering an error. IST® is fully equipped to offer and produce standard and special designed garments according to your needs. Complementary Accessories Selection Complementary elements of protective clothing are of great importance for full protection. You can easily choose and gather the most suitable complementary materials that can be specially used with the protective clothing you purchased such as; personal protective equipments like head, face, hand, respiratory, foot protectors, from our range. Our expert team will guide you in choosing your protective garment and choosing a complementary accessory with the most appropriate international standards for your working area. Pre-Sales Support and Modelling Before production, we design your protective clothing in our advanced technical drawing softwares according to your preferences and submit to your approval. Protective clothings that are purchased because of their high protection levels, but are unsuitable for the working facility may not provide adequate protection and may result in high costs for your company. Appropriate personal protective equipment should be determined as a result of risk analysis by experts. In this regard, our technical team will work in coordination with experts in your facility. Standards and Certification All our products are fully tested by notified bodies in Europe according to the relevant European standards and certified according to the relevant EN standards. In selection of protective clothings, labels inside the suit must be examined well, labels must be printed in accordance with European standards. The information on the label must be verified with certificates. In this regard, our expert technical team will provide consultation to you valuable customers. After-Sales Support Our company provides the necessary information, training and solutions to its customers on the maintenance, use and periodic controls of purchased products. Our company gives repair services for all standard and/or special design protective clothings that are damaged, or have worn parts. In this sense, it is aimed that the user can use the existing product for a long time instead of buying new product. Our sales representatives can provide training on the use of the products. All of our products are warranted against production and workmanship defects for a period of 24 months. Please contact our sales department for detailed information about our services. For such serious equipments, working with an experienced company that values human health and manufactures in accordance with international standards will be the right choice for your facility, your employees and your safety.
This system is used at various sectors for necessary to work in confined spaces in which oxygen content is below 19,5% and toxic gases are exist. System supplies breathable air to user. ISTAIR® 2 x 6 Lt is indispensable for different sectors like as marine, shipyard, refinery, construction and municipality works. Leather belt and belt fixing part. Consist of following parts: Carrying frame with Wheel 2 pcs. Air cylinders Air regulator Connection parts Demand valve with positive pressure full face mask
Bench cans provide ease when working with solvents such as thinner. By pressing the upper plate, liquid can be taken at the desired amount, and when it is released, the plate returns to its original position. The hinged lid reduces evaporation losses to the minimum. Stainless steel and galvanized options are available. Can be produced in different sizes.
SAFECAN® Safety Cans are used for safely transportation, distribution and storage of flammable liquids. SAFECAN® Safety Cans minimize the fire risk by safely reserving the dangerous liquids and keeping the vapor under control. Provides convenience while filling and discharging. Risk stays low when the flammable liquids are stored safely in every sector and even at home. One should remember that risk of accident and fire can be removed when proper safety equipments are used. Flammable liquids are frequently used in industry and daily life. Fuels, solvents, cleaners etc. Use and storage of these liquids brings some risk. Flammable liquids are found in evaporative form in the nature. They react to vapor under normal atmospheric conditions. Speed of Vapor rises in hotter environment or proximity to the heat source. Where Flammable liquids vapor and mix into the air, a condition is set for the vapor to ignite. The heat of the flame is the result of the increase of the flammable vapor. Ignite of the vapor provokes the flame. Flammable liquid vapor, air and heat source are three main pieces that forms the flame. Safety cans keeps the flame source and oxygen out with tight sealed cover. Spring cover automatically shuts and cuts the contact with air and provides tightness. All covers must be tested under pressure to guarantee tightness. In case of fire to prevent explosion, safety cans automatically ventilates air under 0,3 bar pressure. So, the high pressure inside does not create danger. Flames that are provoked by flammable vapors will not spread in the tubes which are in the shape of elongated small diameter pipe. Flame holder tube lets the liquid and vapor while holding the flame to get in. Flame holder, absorbs the heat of the flame and spreads. Vapors in the flame holder will not reach the heat of ignition. Elevated base provides extra durability and protects against any damage. Carrying handle provides convenience while filling and discharging. Spring cover mechanism protects against evaporation and pressure. Bottom of the can is connected with sewn welding and reinforced with clamp. This provides extra durability. Special ribs for reinforcing body metal sheet against lateral bumps and strokes. Inner parts of the cans are covered with corrosion preventive material. Cans are produced as galvanized steel and stainless steel. Galvanized and Painted Safety Cans are more suitable for petrol and derivatives. Stainless Steel Cans are suitable for alcohol, ether, aromatics, hydrocarbon and chlorine based hydrocarbons. Safety cans are separated as Type 1 and Type 2. In Type 1 Cans filling and discharging are done with the same cover. In Type 2 Cans filling cover and discharging covers are separated. There is a flexible metal hose on the cover of discharging in Type 2 cans. This helps a smooth discharge. Transportation of each liquid requires a different color. Red is used for storage and transportation for flammable liquids, blue for kerosene, yellow for diesel fuels and green petrol and derivatives. There has to be a yellow label which includes the warning and directives on each can. Our main goal is to let you work in safe conditions. For this reason, we are protecting you against all risks. - Easy to carry and unfill spring cover mechanism - Durable and protective electro-static powder paint (in galvanized steel models) - Polished and Shiny Surfaces (in stainless steel models) - Reinforced body for impacts - Bottom end, Seamed with Weld and reinforced with clamp - Different models with different sizes Red : Inflammable solvents Blue : Kerosene Yelow : Diesel, petrol and fuel Green : Oil
Dispense flammable liquids and solvents safely, without waste or exposure - Easy to carry and unfill spring cover mechanism - Durable and protective electro-static powder paint (in galvanized steel models) - Polished and Shiny Surfaces (in stainless steel models) - Reinforced body for impacts - Bottom end, Seamed with Weld and reinforced with clamp - Different models with different sizes
Portable Eye Wash, ISTEC Type EW-P, Hand-held, Triggered Spray Nozzle, 25 lt Pressurized Water Tank.....P/N 15019011 Portable Eye Wash, ISTEC Type EW-P, Hand-held, Fixed Spray Nozzle, 25 lt Pressurized Water Tank.....P/N 15019020 Portable Eye Wash, ISTEC Type EW-P, Hand-held, Combined Triggered Spray Nozzle and Fized Spray Nozzle, 25 lt Pressurized Water Tank.....P/N 15019022 The pressure tanks of the units are manufactured in accordance with the 2014/68 / EU directive. Manufactured and certified in accordance with TS EN 13445: 2014 standard. It contains CE mark.
Standard 1500/2000 lt Overhead Tank Showers guarantee 15 minutes of water flow according to the standard requirements in bellow circumstances; 1. Without mains (water) supply connection 2. In low water pressure 3. Interruption of flow in existing water supply connection Different materials (Galvanized Steel, Stainless Steel, GRP) can be used in diffrent system parts as optionally. You can customize your tank shower system by selection guide to integrate the system by choosen desired accessories and various system parts. Water Tanks are insulated. An integral immersion heater or a chiller unit can be added to the system with the options of ex-proof and non ex-proof, in order to keep the water temperature constant between 15-38 °C. Heating and cooling capacities may be changed according to customer requirements. Available in green, yellow or white color Build and design your emergency tank showers in 3D according to the required climate & area classification! Search “Safety Shower Builder” on Apple App Store or click on the link below and stay connected! https://apps.apple.com/tr/app/safety-shower-builder/id1536803797?l=tr
Portable 50 L, pressurised, emergency shower and eye/face wash, with wheeled trolley The pressure tanks of the units are manufactured in accordance with the 2014/68 / EU directive. Manufactured and certified in accordance with TS EN 13445: 2014 standard. It contains CE mark.
As IST Company, with the knowledge we have gained from our past, with our manufacturing capasity and with our referances that we have supplied decontamination systems without problems, we manufacture decontamination systems fixed on trolley and/ or container, with clean water and waste water storage, portable metal clean and waste water storage systems, fixed steel installation decontamination systems suitable for CBRN reference hospitals. Portable steel and stationary systems are generally designed based on a tunnel type washing system that can be configured in a modular structure.
Protective against Freezing with cable heating (10-15 W/m, AC 230 V, Ex-Proof) and complete insulating system Suitable for extreme cold weather conditions Green color is standard. Beige and black color is available.
Protective Garments Against Radiant Heat and Molten Metal Splash EN ISO 11612:2008 A1 B1 C3 D3 E3 F1 Certified.
| # | HS Code | HS Code Description |
|---|---|---|
| 1 | 621133 | Men'S Or Boys' Garments Of Manmade Fibers, Not Knitted Or Crocheted |
| 2 | 650610 | Safety (Including Sports) Headgear, Whether Or Not Lined Or Trimmed |
| 3 | 731021 | Cans, Plain, Unfitted, Of A Capacity Of Less Than 50 Liters (13.21 Gal.), Which Will Be Closed By Soldering Or Crimping, Of Iron Or Steel |
| 4 | 732490 | Sanitary Ware And Parts Thereof , Of Iron Or Steel (Other Than Stainless Steel Sinks Or Wash Basins And Baths Of Iron Or Steel) |
| 5 | 842420 | Spray Guns And Similar Appliances |
| 6 | 902000 | Breathing Appliances And Gas Masks Having Mechanical Parts And/Or Replaceable Filters; Parts And Accessories Thereof |
