SON-MAK MAKİNA İNŞAAT SONDAJ SAN.TİC.LTD.ŞTİ.
Kayapa l. Organize Sanayi Bölgesi Kayapa Sanayi Bulvarı No:4 PK.16280 Nilüfer
Bursa
Turkiye
+90 224 440 05 55
+90 224 482 44 39
SON-MAK, which was established by İzzettin TAVUKCU in Bursa in 1983, adopting as a principle high quality standards, customer satisfaction focusing oriented investments. The company is among the leading and well – established companies in its sector with the principle mutual trust, development and success. With years of experience, SON-MAK has been producing many a different kinds of drilling machines, which are used in its branch and in the sector with the aim of searching the mines on the surface or underground and also the development of the industrial raw materials. Not only with its professional and expert staff but also with the the produced exploration drilling rigs, drilling equipments, mud pumps and injection systems, the company address to the strategically important mining and energy sectors of the world. SON-MAK, which is the leader of the sector, serves at with the most reliable level for the exploration of oil-natural gas, geothermal resources, for the searching of ground water, for the evaluation of dam areas, for the improvement of tunnels, bridges, weak soils, SON-MAK is a global manufacturer of the drilling machines in with its factory in 14.500 sqm closed area. SON-MAK, with its own brand name “LEVENT, constantly updating itself by following the new trends in the sector and always taking into consideration of the customer satisfaction higher, strives to produce new machines and equipment in the world standards by keeping up with the sustainable growth and with the high technology in its product range.
RX-5 is fully hydraulic diamond core drilling rig, designed for surface research drillings. It is the perfect combination of the proven RX concept, combined with new and powerful components. RX-5 uses well proven technology for diamond core drills combined with new improvements in order to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control pane provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed cylinder, advanced diesel engine, foldable mast and Gas Spring Rod Holder. RX-5 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal performance in 60-122.6 mm (B-P) diameter wireline or conventional drilling. RX-5, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling rig advancement position; – Hold back force, – Feed force, – Rotation speed, It can observe the data and is able to control diesel engine. RX-5, can be mounted on 3 different chassis. – Skid frame – Wheel frame – Crawler frame RX-5 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done. RX-5 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentageand big time save.
RX-4 is fully hydraulic diamond core drilling rig, designed for surface research drillings. It is the perfect combination of the proven RX concept, combined with new and powerful components. The RX-4 uses well proven technology for diamond core drills combined with new improvements in order to get easy drill operation. Hydraulic jacks, mast dump, hinged top mast and all controls available at the control panel provide the driller an easy set-up. Other features such as the strong main winch, powerful direct feed cylinder, advanced diesel engine, telescopic mast and Gas Spring Rod Holder. RX-4 Coring Rig rotation speed, power and rotation unit aperture diameter is designed to give optimal sperformance in 60-122.6 mm (B-P) diameter wireline or conventional drilling. RX-4, drilling unit, power unit, wireline unit (automatic winding system), main winch control of the mixer and mud pump are performed from the operator panel. The gauge located on the operator panel displays, drilling rig advancement position; – Hold back force, – Feed force, – Rotation speed, It can observe the data and is able to control diesel engine. RX-4, can be mounted on 3 different chassis. – Skid frame – Wheel frame – Crawler frame RX-4 drilling rig, as progress is being achieved with the drilling rig hydraulic cylinder, more precise settings can be done. RX-4 drilling rig, automatic rod removal and clamping feature allows high progress rate, optimal core percentage and big time save.
The LEVENT 3003 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit, the power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc.. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electric power unit, an optional diesel engine for tramming is available. The LEVENT 3003 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline, hoist sequences are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder, thereby eliminating chains in the feed system. The drill can be equipped with two different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. To achieve the best results with regard to: -High penetration -Optimal core recovery -Low drilling costs It is of primary importance that drill rods, core barrels and coring bits are of the right type and quality, matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill’s speed of rotation,its rating and chuck diameter, the LEVENT 3003 is best suited to drill holes 60-96 mm in diameter (B-H) using both conventional as well as wire line rods. The spindle inner diameter is 101.6 mm (4 in) in the H-size rotation unit.
The Levent 2002 is an all-hydraulic diamond core drill rig with a wide range of options and accessories.It consists of three main parts: the drill unit, the power unit and a control console. As an option the drill unit can be mounted on carriers for special purposes like; a narrow crawler for underground use, or a wide crawler for surface use. It is suitable for a variety of drilling methods in both underground and surface operations such as core drilling, grout hole drilling, probing etc.. The drill unit can be powered by an electric motor or diesel engine. When the drill rig is equipped with the electric power unit, an optional diesel engine for tramming is available. The Levent 2002 uses the best technology available for diamond core drills. All tube jointing, thread breaking, feeding, wireline hoist sequences are controlled from a control console which can be positioned to suit the setup. Feeding is done by a direct cylinder and chain system. The drill can be equipped with three different feed lenghts,and two different sizes of rotation units to suit rod size and drilling applications. To achieve the best results with regard to: -High penetration -Optimal core recovery -Low drilling costs It is of primary importance that drill rods,core barrels and coring bits are of the right type and quality, matched to the rock drill and to the prevailing rock conditions. Bearing in mind core drill’s speed of rotation,its rating and chuck diameter, the LEVENT 2002 is best suited to drill holes 48-76 mm in diameter (A-N) using both conventional as well as wire line rods. The spindle inner diameter is 78 mm (3.07 in) in the N-size rotation unit.
Levent 1001 is a fully hydraulic core drilling machine, is designed for surface and underground exploration drilling and grouting applications. A standard Levent 1001 consists of four main parts; Drilling unit, Control panel, Power unit and, Mud pump. Optional drilling machine can be mounted on crawler. For underground works narrow; for surface works width crawler is used. The measure of Levent 1001 are designed for working on narrow tunnels and galleries beside of easy installation and quick set up to the drilling location. Levent 1001 Drilling Machine with automatic rod clamping and removal feature, provides great time savings.
| # | HS Code | HS Code Description |
|---|---|---|
| 1 | 841381 | Pumps For Liquids, |
| 2 | 842420 | Spray Guns And Similar Appliances |
| 3 | 843041 | Boring Or Sinking Machinery, Self-Propelled |
| 4 | 843049 | Boring Or Sinking Machinery, Other Than Self-Propelled |
