| NO | HS CODE | HS CODE Description |
| 1 | 120590 | Rape Or Colza Seeds (Other Than Of Low Erucic Acid), Whether Or Not Broken |
| 2 | 140110 | Bamboos Used Primarily For Plaiting |
| 3 | 140420 | Cotton Linters |
| 4 | 262011 | Hard Zinc Spelter |
| 5 | 271019 | Petroleum Oils & Oils (Not Light) From Bituminous Minerals Or Preps 70%+ By Wt. From Petroleum Oils Or Bitum. Min. |
| 6 | 281511 | Sodium Hydroxide (Caustic Soda), Solid |
| 7 | 282732 | Aluminum Chloride |
| 8 | 290362 | Hexachlorobenzene And Ddt (1,1,1-Trichloro-2,2-Bis(P-Chlorophenyl) Ethane) |
| 9 | 290544 | D-Glucitol (Sorbitol) |
| 10 | 291010 | Oxirane (Ethylene Oxide) |
| 11 | 292142 | Aniline Derivatives And Their Salts |
| 12 | 370252 | Photographic Film Rolls, , Film , For Color Photography, Not Over 16 Mm (0.6 In.) Wide And Over 14 M (46 Ft.) Long, Sensitized, Unexposed |
| 13 | 370255 | Photographic Film Rolls, , Film , For Color Photography, Over 16 Mm, But Not Over 35 Mm Wide And Over 30 M Long, Sensitized, Unexposed |
| 14 | 390950 | Polyurethanes, In Primary Forms |
| 15 | 401290 | Solid Or Cushion Tires, Interchangeable Tire Treads And Tire Flaps, Of Rubber |
| 16 | 440921 | Wood Continuously Shaped Along Any Of Its Edges, Ends Or Faces, Whether Or Not Planed, Sanded Or End-Jointed Of Bamboo |
| 17 | 480439 | Kraft Paper And Paperboard, , Weighing Not Over 150 G/M2, Uncoated, Bleached, In Rolls Or Sheets |
| 18 | 481930 | Sacks And Bags, Having A Base Of 40 Cm (15.75 In.) Wide Or More, Of Paper, Paperboard, Cellulose Wadding Or Webs Of Cellulose Fibers |
| 19 | 710510 | Diamond Dust And Powder, Natural And Synthetic |
| 20 | 720421 | Stainless Steel Waste And Scrap |
| 21 | 721931 | Flat-Rolled Stainless Steel Products, 600 Mm Or More Wide, Cold-Rolled, 4.75 Mm Or More Thick |
| 22 | 721933 | Flat-Rolled Stainless Steel Products, 600 Mm Or More Wide, Cold-Rolled, Over 1 Mm But Under 3 Mm Thick |
| 23 | 722020 | Flat-Rolled Stainless Steel Products, Under 600 Mm Wide, Cold-Rolled |
| 24 | 730120 | Welded Angles, Shapes And Sections Of Iron Or Steel |
| 25 | 730431 | Tubes, Pipes And Hollow Profiles, Seamless , Of Circular Cross Section Of Iron Or Nonalloy Steel, Cold-Drawn Or Cold-Rolled |
| 26 | 740921 | Plates, Sheets And Strip Of Copper-Zinc Base Alloys (Brass), Over 0.15 Mm Thick, In Coils |
| 27 | 741021 | Copper Foil, Backed, Of Refined Copper, Not Over 0.15 Mm Thick |
| 28 | 750512 | Nickle Bars, Rods And Profiles, Of Nickle Alloys |
| 29 | 760120 | Aluminum Alloys, Unwrought |
| 30 | 760410 | Aluminum Bars, Rods And Profiles, Not Alloyed |
| 31 | 7604101190 | Bars & rods,alum,not alloyed,unworked,max cross-sect dim >12.7mm, nes |
| 32 | 7604102019 | Bars & rods,aluminum,not alloyed,worked,max cross-sect dim >12.7mm, nes |
| 33 | 760421 | Aluminum Alloy Hollow Profiles |
| 34 | 76042100 | Hollow profiles |
| 35 | 7604210010 | Profiles,Hollow,Aluminum,Alloyed,Unworked |
| 36 | 760429 | Aluminum Alloy Bars, Rods And Profiles, Other Than Hollow Profiles |
| 37 | 7604291110 | Bars And Rods, Of Aluminum, Alloyed, Unworked, Having A Round Cross-Sectional Dimension Exceeding 12.7Mm |
| 38 | 76042930 | Bars and rods, other than wire rods |
| 39 | 76042990 | Other |
| 40 | 760612 | Aluminum Alloy Rectangular (Including Square) Plates, Sheets And Strip, Over 0.2 Mm Thick |
| 41 | 7606129021 | Plate,Sheet/Strip,Aluminum Alloy,Not In Coils,Not Clad,>0.2 But <7Mm Thk |
| 42 | 760820 | Aluminum Alloy Tubes And Pipes |
| 43 | 76082000 | Of aluminium alloys |
| 44 | 7608200090 | Tubes and pipes, aluminum alloy, nes |
| 45 | 761090 | Aluminum Structures And Parts Of Structures, |
| 46 | 761210 | Aluminum Collapsible Tubular Containers, Of A Capacity Not Over 300 Liters (79.30 Gal.) |
| 47 | 76169990 | Other |
| 48 | 790500 | Zinc Plates, Sheets, Strip And Foil |
| 49 | 830520 | Staples In Strips, Of Base Metal |
| 50 | 847439 | Machines For Mixing Or Kneading Earth, Stone, Ore Or Other Mineral Substances In Solid Form, |
| 51 | 847981 | Machines And Mechanical Appliances For Treating Metal, Including Electric Wire Coil-Winders |
| 52 | 850134 | Dc Motors And Generators Of An Output Exceeding 375 Kw |
| 53 | 853222 | Fixed Capacitors , Aluminum Electrolytic |
| 54 | 853230 | Variable Or Adjustable (Pre-Set) Capacitors |
| 55 | 871493 | Hubs (Other Than Coaster Braking Hubs And Hub Brakes) And Free-Wheel Sprocket-Wheels For Bicyles And Other Cycles |
| 56 | 900120 | Sheets And Plates Of Polarizing Material |
| 57 | 903130 | |
